Solaride EasyThe entry-level model. Ready to plug in.
Fourteen infrared lamps with a combined 2,450 W: just plug into 230 volts and get started. No UV and no fans, but just right for one to three horses.
Photo Kati Mandelkow · Solaride Profi in use
The data sheet, line by line
Price and configuration
One version, one price: ready to plug in on 230 V, with 5 m of cable. If you want to charge by coin or chip card, Easy Plus or Profi is the right choice.
Longer cable? The Easy is supplied with 5 m of cable. We are currently looking into whether longer ones are possible. Feel free to ask.
Construction
Flat, rectangular housing made of coated aluminium with the lamps on the underside. Two outer rows of red Philips PAR38, a clear row in the middle; all three rows are infrared.
- Dimensions
- 1800 × 150 × 760 mm
- Weight
- 18 kg
- Underside
- coated aluminium
2Equipment
- Lamps
- 14 × IR-A (Philips PAR38, 175 W)
- UV
- no UV
- Ventilation
- none, only passive ventilation grilles
- Air output
- —
Taken apart
Every assembly is named individually, and each can be reordered individually. That is possible because we put every unit together ourselves.
| Item | Assembly | Version |
|---|---|---|
| 1 | Housing tray | Flat housing, coated aluminium |
| 2 | Lamp carrier | Aluminium sheet with the lamp holders |
| 3 | Red lamp array | 10 × Philips PAR38 IR-A, red bulb glass |
| 4 | Clear lamp array | 4 × PAR38 IR-A, clear bulb glass |
| 5 | Ventilation grille | Passive, without fan |
| 6 | Chain suspension | Chain, to be fixed on site by the customer |
3Electrics
- Connected load
- 2,450 W
- Voltage
- 230 V · 10.6 A
- Control
- timer switch, supplied
- Connection
- ready to plug in, Schuko plug, 230 V
5Installation
- Suspension
- ceiling suspension on chains, to be fixed on both sides
- Clear height
- depending on the size of the horse, to the height calculator
- Condition on delivery
- ready to install, with installation instructions
6Scope of delivery
- Unit
- bulbs packed separately, fitted after installation
- Control
- timer switch
- Documents
- operating instructions, installation instructions, declaration of conformity
7Tests and guarantee
- Electrical safety
- TÜV Thüringen, test report available. The 2026 test is in progress.
- Conformity
- CE, RoHS
- Guarantee
- 2 years, except UV bulbs · Terms
- Manufacture
- Emmerich am Rhein, built by hand
The last concern
Dimensions and fit
Will it fit over my horse?
The most important question first. Measure the clear height at the spot where the unit is to hang, from the stable aisle to the underside of the beam or ceiling, and the withers height of your horse.
What the calculator cannot see: beam layout, ceiling load and power supply. The Easy runs ready to plug in on 230 V; the Profi needs 400 V. If it is tight, simply send us a photo of the spot. We will look at it before you order.
- Clear height in the stable
- 3.20 m
- Clear below the unit
- 2.05 m
The same lines for all three.
All three units side by side, so you do not have to switch between pages. Details we are still to supply are marked as open.
The other two models.
Perhaps one of them suits your stable even better.